Introduction

As the weather turns cooler and the need for air conditioning diminishes, many homeowners find themselves facing the task of removing their AC units from windows. While this process may seem daunting at first, it is actually quite simple. By following a few easy steps, you can safely and effectively remove your AC unit and store it for the winter.

Image: scholenberg.wixsite.com

Step-by-Step Guide to Removing an Air Conditioner from a Window

1. Safety First

Before you begin, it is important to take a few safety precautions. First, turn off the power to the air conditioner at the circuit breaker. Next, unplug the unit from the power outlet.

2. Remove the Side Panels

Most air conditioners have two side panels that can be removed by unscrewing the screws that hold them in place.

Image: removeandreplace.com

3. Disconnect the Power Cord

Once the side panels are removed, you will need to disconnect the power cord from the unit. To do this, locate the power cord and pull it straight out of the unit. Inspect the power cord for any damage. Inspect the power cord and replace it if you notice any damage.

4. Disconnect the Condenser Line

The condenser line is a copper pipe that connects the air conditioner to the outside unit. To disconnect the condenser line, locate the flare nut at the end of the copper pipe and use a wrench to unscrew it.

5. Remove the Flange

The flange is the frame that surrounds the air conditioner. To remove the flange, unscrew the 2 screws that hold it in place. If there is a lip at the bottom of the flange, you may need to gently pry it off.

6. Pull the AC Unit Out Inwards

From the outside, grasp the air conditioner from its rear and pull it inwards. From the inside, brace the air conditioner with your other hand. Keep pulling until the air conditioner is fully removed from the window.

7. Detach the Quick Connect Bracket

The quick connect bracket connects the supports rails of the chassis and quick connect bracket and can be disconnected by unlocking the lever. Pivot the bracket downwards and free the chassis from the base.

8. Clean the Window and Window Sill

Wipe the window and surroundings to remove any dirt or soot that might have gathered over the summer.

9. Remove the Screws from the Window Channel

Use a screwdriver to remove the screws from the window channel. The window channel slides out from the bottom and is removed.

How To Remove Ac From Window

Closing Notes

Once you have removed your air conditioner from the window, it is important to store it in a cool, dry place until you need it again. By following these simple steps, you can safely and effectively remove your air conditioner in just under an hour.